opm-common
Loading...
Searching...
No Matches
Opm::Co2GasPvt< Scalar, Storage > Class Template Reference

This class represents the Pressure-Volume-Temperature relations of the gas phase for CO2. More...

#include <Co2GasPvt.hpp>

Public Types

using BinaryCoeffBrineCO2 = BinaryCoeff::Brine_CO2<Scalar, H2O, CO2>
 The binary coefficients for brine and CO2 used by this fluid system.

Public Member Functions

 Co2GasPvt (const ContainerT &salinity, int activityModel=3, int thermalMixingModel=1, Scalar T_ref=288.71, Scalar P_ref=101325)
 Co2GasPvt (const Params &params, const ContainerT &brineReferenceDensity, const ContainerT &gasReferenceDensity, const ContainerT &salinity, bool enableEzrokhiDensity, bool enableVaporization, int activityModel, Co2StoreConfig::GasMixingType gastype)
void setNumRegions (std::size_t numRegions)
OPM_HOST_DEVICE void setVapPars (const Scalar, const Scalar)
OPM_HOST_DEVICE void setReferenceDensities (unsigned regionIdx, Scalar rhoRefBrine, Scalar rhoRefGas, Scalar)
 Initialize the reference densities of all fluids for a given PVT region.
OPM_HOST_DEVICE void setEnableVaporizationWater (bool yesno)
 Specify whether the PVT model should consider that the water component can vaporize in the gas phase.
OPM_HOST_DEVICE void setActivityModelSalt (int activityModel)
 Set activity coefficient model for salt in solubility model.
OPM_HOST_DEVICE void setThermalMixingModel (int thermalMixingModel)
 Set thermal mixing model for co2 in brine.
OPM_HOST_DEVICE void initEnd ()
 Finish initializing the co2 phase PVT properties.
OPM_HOST_DEVICE unsigned numRegions () const
 Return the number of PVT regions which are considered by this PVT-object.
OPM_HOST_DEVICE Scalar hVap (unsigned) const
template<class Evaluation>
OPM_HOST_DEVICE Evaluation internalEnergy (unsigned regionIdx, const Evaluation &temperature, const Evaluation &pressure, const Evaluation &rv, const Evaluation &rvw) const
 Returns the specific enthalpy [J/kg] of gas given a set of parameters.
template<class Evaluation>
OPM_HOST_DEVICE Evaluation viscosity (unsigned regionIdx, const Evaluation &temperature, const Evaluation &pressure, const Evaluation &, const Evaluation &) const
 Returns the dynamic viscosity [Pa s] of the fluid phase given a set of parameters.
template<class Evaluation>
OPM_HOST_DEVICE Evaluation saturatedViscosity (unsigned, const Evaluation &temperature, const Evaluation &pressure) const
 Returns the dynamic viscosity [Pa s] of fluid phase at saturated conditions.
template<class Evaluation>
OPM_HOST_DEVICE Evaluation inverseFormationVolumeFactor (unsigned regionIdx, const Evaluation &temperature, const Evaluation &pressure, const Evaluation &rv, const Evaluation &rvw) const
 Returns the formation volume factor [-] of the fluid phase.
template<class FluidState, class LhsEval = typename FluidState::Scalar>
std::pair< LhsEval, LhsEval > inverseFormationVolumeFactorAndViscosity (const FluidState &fluidState, unsigned regionIdx)
 Returns the formation volume factor [-] and viscosity [Pa s] of the fluid phase.
template<class Evaluation>
OPM_HOST_DEVICE Evaluation saturatedInverseFormationVolumeFactor (unsigned regionIdx, const Evaluation &temperature, const Evaluation &pressure) const
 Returns the formation volume factor [-] of water saturated gas at given pressure.
template<class Evaluation>
OPM_HOST_DEVICE Evaluation saturationPressure (unsigned, const Evaluation &, const Evaluation &) const
 Returns the saturation pressure of the gas phase [Pa] depending on its mass fraction of the brine component.
template<class Evaluation>
OPM_HOST_DEVICE Evaluation saturatedWaterVaporizationFactor (unsigned regionIdx, const Evaluation &temperature, const Evaluation &pressure) const
 Returns the water vaporization factor $R_vw$ [m^3/m^3] of the water phase.
template<class Evaluation = Scalar>
OPM_HOST_DEVICE Evaluation saturatedWaterVaporizationFactor (unsigned regionIdx, const Evaluation &temperature, const Evaluation &pressure, const Evaluation &saltConcentration) const
 Returns the water vaporization factor $R_vw$ [m^3/m^3] of water phase.
template<class Evaluation>
OPM_HOST_DEVICE Evaluation saturatedOilVaporizationFactor (unsigned regionIdx, const Evaluation &temperature, const Evaluation &pressure, const Evaluation &, const Evaluation &) const
 Returns the oil vaporization factor $R_v$ [m^3/m^3] of the oil phase.
template<class Evaluation>
OPM_HOST_DEVICE Evaluation saturatedOilVaporizationFactor (unsigned regionIdx, const Evaluation &temperature, const Evaluation &pressure) const
 Returns the oil vaporization factor $R_v$ [m^3/m^3] of the oil phase.
template<class Evaluation>
OPM_HOST_DEVICE Evaluation diffusionCoefficient (const Evaluation &temperature, const Evaluation &pressure, unsigned) const
OPM_HOST_DEVICE Scalar gasReferenceDensity (unsigned regionIdx) const
OPM_HOST_DEVICE Scalar oilReferenceDensity (unsigned regionIdx) const
OPM_HOST_DEVICE Scalar waterReferenceDensity (unsigned regionIdx) const
OPM_HOST_DEVICE Scalar salinity (unsigned regionIdx) const
void setEzrokhiDenCoeff (const std::vector< EzrokhiTable > &denaqa)
OPM_HOST_DEVICE const ContainerT & getBrineReferenceDensity () const
OPM_HOST_DEVICE const ContainerT & getGasReferenceDensity () const
OPM_HOST_DEVICE const ContainerT & getSalinity () const
OPM_HOST_DEVICE bool getEnableEzrokhiDensity () const
OPM_HOST_DEVICE bool getEnableVaporization () const
OPM_HOST_DEVICE int getActivityModel () const
OPM_HOST_DEVICE Co2StoreConfig::GasMixingType getGasType () const
OPM_HOST_DEVICE const Params & getParams () const

Static Public Member Functions

static OPM_HOST_DEVICE constexpr bool isActive ()

Detailed Description

template<class Scalar, template< class > class Storage = VectorWithDefaultAllocator>
class Opm::Co2GasPvt< Scalar, Storage >

This class represents the Pressure-Volume-Temperature relations of the gas phase for CO2.

Member Function Documentation

◆ saturationPressure()

template<class Scalar, template< class > class Storage = VectorWithDefaultAllocator>
template<class Evaluation>
OPM_HOST_DEVICE Evaluation Opm::Co2GasPvt< Scalar, Storage >::saturationPressure ( unsigned ,
const Evaluation & ,
const Evaluation &  ) const
inline

Returns the saturation pressure of the gas phase [Pa] depending on its mass fraction of the brine component.

Parameters
RvwThe surface volume of brine component vaporized in what will yield one cubic meter of water at the surface [-]

◆ setEnableVaporizationWater()

template<class Scalar, template< class > class Storage = VectorWithDefaultAllocator>
OPM_HOST_DEVICE void Opm::Co2GasPvt< Scalar, Storage >::setEnableVaporizationWater ( bool yesno)
inline

Specify whether the PVT model should consider that the water component can vaporize in the gas phase.

By default, vaporized water is considered.

The documentation for this class was generated from the following files:
  • opm/material/fluidsystems/blackoilpvt/Co2GasPvt.hpp
  • opm/material/fluidsystems/blackoilpvt/Co2GasPvt.cpp